Leading 10 usual forklift accidents ， forklift operation need to pay attention to these issues ！.

Don't undervalue the forklift at work. If the procedure is bad, there will certainly be significant accidents in minutes, and there are numerous mishaps including forklifts.

Situation 1: The forklift cargo obstructed the vehicle driver's view, and the individual ahead might not be discovered, leading to a moving mishap.
Situation 2: In order to preserve the balance of the forklift when lifting heavy items, the employees used their body weight as the weight, which virtually created casualties.
Case 3: The size of the forklift freight goes beyond the allowed size of the course and holds on the roadside shelf, which practically causes an accident.
Instance 4: Forklift is speeding up and rolls over during a turn.
Case 5: The forklift vehicle driver did not see the pedestrian, and the pedestrian did not observe the forklift.
Situation 6: The forklift lifts the employees unlawfully, the forklift motorist does not use the seat belt, the forklift lifter drops and the motorist is crushed when the forklift rolls over.
Case 7: The forklift vehicle driver did not put on a safety belt and fell from the lorry when it surrendered and was crushed.
Forklift operation must focus on these matters ：.

Beginning.
1. Before starting, observe the environments, and after verifying that there are no obstacles that prevent the security of driving, honk the horn initially and then begin.
2. For cars with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) gauge have to be risk-free before beginning.
3. When the forklift begins with a tons, the driver must first verify that the load is secure and reputable.
4. The beginning should be slow-moving and stable.

Driving.
1. When driving, the elevation between the bottom end of the fork and the ground must be maintained 300mm-400mm, and the mast needs to be tilted backwards. .
2. Do not raise the fork too high when driving. When going into and leaving the job site or while driving, take care that there will be no challenges overhead. When the load is taking a trip, the fork should not be elevated too high, which will impact the security of the forklift. .
3. After unloading, the fork should be reduced to the regular driving position prior to driving. .
4. When transforming, if there are pedestrians or cars close by, the driving signal needs to be issued first. High-speed sharp turns are forbidden. High-speed doglegs will certainly cause the car to lose side security and topple. .
5. When the forklift is downhill, it is purely forbidden to switch off the fire and slide, and it is restricted to brake suddenly while driving with loads unless there are special scenarios.
6. When the forklift is running, it has to comply with the traffic rules in the factory and should keep a specific security distance from the car in front. .
7. When the forklift is running, the tons needs to remain in the most affordable setting that does not impede the driving, and the gantry must be appropriately slanted back. The tons shall not be increased except when stacking or loading. .
8. The height of the lots have to not obstruct the vehicle driver's view. In unique conditions, when the thing impacts the forward vision, drive at a low speed when reversing.
9. It is forbidden to activate the ramp, neither to drive across the ramp. .
10. The risk-free driving speed of the forklift in the manufacturing facility location is 5 km/h, and it needs to drive safely at a low rate when going into the production workshop area. .
11. When the forklift is raised, raised or driven, it is forbidden for personnel to depend on the fork to hold products and play a balancing role. .
12. If troubles are discovered, they will be repaired and reported in a prompt fashion, and they will never run with diseases or conceal them.

filling and discharging.
1. When fork-loading items, the distance in between both forks ought to be changed as needed to make the load of both forks balanced and not skewed, and one side of the product ought to be against the rack. .
2. It is forbidden to work with a solitary fork or use a fork top or pull. In unique situations, safety and security warning signs have to be established to remind surrounding pedestrians. .
3. In the process of filling and unloading items, the forklift should be stopped with the brake. .
4. The rate of the car should be slow and steady. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled objects and harm people. .
5. When using a fork to fork the goods, the fork should be as deep as feasible under the tons, and it ought to be kept in mind that the fork idea must not touch various other products or objects. The lots must be stabilized with marginal back tilt of the gantry to make sure that the load does not slide backwards. The mast can be slanted ahead somewhat when the tons is decreased to permit easy placement of the load and extraction of the forks. .
6. It is restricted to fork products at broadband and hit tough objects with the fork head. .
7. When the forklift is functioning, it is forbidden for individuals to stand around the fork, so as to avoid the collapse of the goods and harm individuals. Electric Forklift Truck for Warehouse .
8. Overloading is forbidden, and it is forbidden to utilize forks to lift workers to engage in high-altitude operations to stay clear of high-altitude dropping accidents. .
9. It is not permitted to utilize the brake inertia to slide, place, round or roll things. .
10. It is not enabled to use forks to choose, transform pallet discharge.

Leaving .
1. It is prohibited to leave the forklift when the products on the fork are in the air. Before leaving Stand-on Electric Pallet Stacker the forklift, you have to dump the goods or reduced the fork frame.
2. Draw the hand brake take care of to dead or dispirit the parking brake button.
3. The engine is shut off and the power is cut off. (Except for special circumstances, such as the driver does not leave the car's view and does not surpass 1 min).
4. Eliminate the secret. .

Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the look must be checked, and gas, lubing oil and air conditioning water must be added.
2. Examine the security efficiency of beginning, running and braking.
3. Examine whether the lights and horn signals are complete and effective.
4. Throughout the procedure of the forklift, examine whether the pressure and temperature are regular.
5. After the forklift is running, the outside leakage must additionally be checked and the seals ought to be replaced in time.

Forklift Safety Operation Specifications.
1. You should examine prior to leaving the auto;.
2. When you run into someone before you throughout driving, you ought to send out a signal at a distance of 5 m;.
3. The driving speed in the manufacturing facility does not surpass 5 km/h;.
4. When driving, the nadir of the cargo need to be 0.3 m ~ 0.4 m in the air;.
5. The transforming ought to not be too sharp to prevent the tendency of " complimentary switching";.
6. Adding and down the incline should be sluggish and uniform, and no activating the slope is permitted.
7. Do not drive across the gradient. When the gradient is above 10%, the vehicle should be driven backwards when declining;.
8. When the forklift personnel carry the goods and progress, if they experience huge or heavy items and most likely to the motorist's line of sight, they must take the reversing workout
.
The "Eight Prohibitions" ought to be followed in the operation.
1. Single fork procedure is not permitted.
2. It is not enabled to raise the goods for cross country driving.
3. It is not enabled to get the goods by turning over the pallet with the fork.
4. It is not enabled to straight shovel chemicals, flammables and other dangerous chemicals with forks.
5. It is not allowed to use inertia force to get the goods.
6. It is not allowed to utilize stopping pressure to expatriation round or easy-to-roll items.
7. It is not enabled to bring people to service the pallet or fork, and it is purely prohibited to stand under the fork after the fork is elevated.
8. Do not drive laterally on slopes
.
Parking is not permitted under the following problems.
1. Contours, narrow roadways, train crossings;.
2. Areas with a longitudinal incline above 5%.
3. When there is an obstacle on one side of the road, the contrary side of the section with the same size as the barrier should be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844